Targa roll bar for boats made completely in stainless steal (quality AISI 316, same as EN 1.4401). They all have adjustable width (the measurements are for the base with at the bottom of the roll bar), and a fixed height of 120 centimeters.

The attachments to the floor of the boat makes it foldable forward towards the bow of the boat. See pictures of the floor fixings possible to open and secure with a hand nut. When standing up, the angle from the foot plate to the frame above is about 30 degrees.

The Targa roll bar comes with “two plates for equipment” on each side of the outer sections. There is also a total of three plates on the top part (one plate on the mid section and one on each top of the two side sections). See picture of the mid section in the pictures.

There is also an opening to the very bottom of the base plate for electrical cables to come through (see one of the pictures).

There are three dimensions of the tube, diameters 30 mm, 40 mm or 50 mm. See the options below.

The base plate (the foot if you like) on each side measures 26 x 5 centimeters on the 30 mm and the 40 mm version, for the 50 mm version, the base plate is 28 x 6,5 cm.

Delivery time: The normal delivery time for these targa roll bars are approx 2-3 weeks.